12. USEFUL FEATURES OF THE SJ-210
No. 99MBB122A
12-5
12.6 Saving Measurement Results Automatically
When the Save 10 function is enabled, measurement results can be saved on the memory
card automatically.
Measurement results are saved in the memory card's Save 10 folder. To load the
measurement results, select the “Read10Data” on the Measurement Result Menu screen.
Measurement Result Menu screen
You can save, print and recalculate the loaded results in the same way as the usual
measurement results.
NOTE
• This function is available only when a memory card (optional) is inserted.
• The result data of the measurements performed before the last 10 measurements are
deleted in order from the oldest data.
• After the power to the instrument is turned on, the first time data is saved may take more
time than usual.
TIP
• For information about setting the Save 10 function, refer to 10.10.4, “Setting the Save
10 function”.
• For information about loading measurement results which has been saved using the
Save 10 function, refer to 9.4, “Loading Measurement Results”.
12.7 Hard Copying the Screen
The displayed screen image can be saved as BMP data to the memory card.
The image data is saved in the “IMG” folder on the memory card.
The image data can be transferred to a personal computer using communication software
or a third-party SD card reader.
TIP
• For information about setting the hard copying the screen, refer to 10.3.4, “Setting the
data output to hard copy”.
• The camera icon㧔
㧕appears on the upper screen during hard copy screen mode.
To Next Page
Loading...
