Mitutoyo SJ-210 - Setting the Auto-Sleep Function When Using the Built-In Battery

3. SETTING UP THE SJ-210
No. 99MBB122A
3-23
3.4.3 Setting the auto-sleep function when using the built-in battery
The SJ-210 is capable of setting the auto-sleep function in use of the built-in battery.
NOTE
• When the AC adapter is used, auto-sleep does not function irrespective of the setting of
the auto-sleep function. To turn off the SJ-210 power, press and hold the [Esc/Guide]
key.
TIP
• For information about setting the auto-sleep function, refer to 10.11, “Setting the
auto-sleep function”.