Mitutoyo SJ-210 - Setting the Auto-Sleep Function

10. OPERATING ENVIRONMENT SETUP
No. 99MBB122A
10-37
10.11 Setting the Auto-sleep Function
The SJ-210 has an auto-sleep function for when the built-in battery is being used.
NOTE
• When the AC adapter is used, auto-sleep does not function irrespective of the setting of
the auto-sleep function. To turn off the SJ-210 power, press and hold the [Esc/Guide]
key.
■ Operating procedure (Refer to “■ Accessing the Operating Environment Setup Menu screen” in Section
10.1.)
Home screen to Main Menu  
1 Select “Auto-sleep” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
2 Set the auto-sleep function to ON or OFF.
Pressing the [Enter/Menu] key cycles through the available settings,
“ON” and “OFF”.
“ON”: Sets the auto-sleep function to ON.
“OFF”: Sets the auto-sleep function to OFF.
3 Select “Wait time” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu]
key.
Operating Environment
Setup menu screen
Auto-Sleep Setup screen
Auto-Sleep Setup screen