Mitutoyo SJ-210 - Modifying Profile Filters

No. 99MBB122A
7-8
7.5 Modifying Profile Filters
Profile filters can be set to 2CR75, PC75, or GAUSS.
NOTE
• Be careful when modifying the roughness standard, as the profile filter may be
automatically modified as a result.
■ Profile filters with roughness standards and evaluation profiles
Profile filters are automatically set according to the roughness standard and evaluation
profile selected, as tabulated below.
Evaluation profiles
Roughness
Standard
P R DF R-Motif
JIS1982 NONE 2CR75 - -
JIS1994 - GAUSS - -
JIS2001 GAUSS GAUSS GAUSS GAUSS
ISO1997 GAUSS GAUSS GAUSS GAUSS
ANSI
-
PC75
GAUSS
- -
VDA (NONE
*1
)
GAUSS
GAUSS GAUSS -
Free (NONE
*1
)
2CR75
PC75
GAUSS
2CR75
PC75
GAUSS
GAUSS
(NONE
*1
)
2CR75
PC75
GAUSS
*
1
: When “λs” is set to “NONE”.
Profile filters can be modified as necessary by following the procedure explained on the
following page.
TIP
• For information on the properties of profile filters, refer to 18.2.2, “Filters”.