No. 99MBB122A
11-10
11.6 Switching Measurement Conditions List Screen
This section explains how to set the display direction and select non-display of the current
measurement conditions list.
■ Operating procedure (Refer to “■ Accessing the Screen Change Menu screen” in Section 11.2.)
Home screen to Main Menu
1 Select “Cond.List” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu]
key.
2 Select the display direction of the evaluation profile with the [ ↑ ] [ ↓ ]
key, and press the [Enter/Menu] key.
The setup item is as follows.
“V-Disp.”: Set the display direction of the conditions list to vertical.
“H-Disp.”: Set the display direction of the conditions list to horizontal.
“No Disp.”: The conditions list is not displayed.
The setup items appear on the Screen Change Menu screen.
TIP
• For information about display after setup has been
completed, refer to 11.1, “Screen Display”.
• Press the [Esc/Guide] key to return to the previous screen.
• The screen returns to the Home screen when the “Home”
([Blue] key) is pressed.
Screen Change Menu screen
Screen Change Menu screen
Condition List Display
Setup screen
To Next Page
Loading...
