Mitutoyo SJ-210 - Printing Calculation Results and Measurement Conditions

13. SAVE / OUTPUT RESULTS USING [POWER/DATA] KEY
No. 99MBB122A
13-11
13.2.3 Printing calculation results and measurement conditions
You can print out calculation results or measurement conditions from the SJ-210 when
data output is set to “Printer”.
Calculation results or measurements conditions are printed when the [POWER/DATA] key
is pressed.
TIP
• For information about connecting the SJ-210 and printer, refer to 13.2.1, “Connecting
the SJ-210 and printer”.
• For information about setting data output, refer to 10.3.2, “Setting the data output to a
printer”.
• You can load saved measurement data and print the calculation results.For information
about loading measurement data, refer to 9.4, “Loading Measurement Results”.
1 Perform the measurement.
NOTE
• For information about measurement, refer to Chapter 4, “MEASUREMENT
OPERATION”.
2 Display the calculation result to output.
3 Press the [POWER/DATA] key.
 Calculation results are printed.