No. 99MBB122A
12-4
12.5 Loading/Saving 10 Measurement Conditions
Measurement conditions can be set in the memory of the SJ-210 up to 10. To load the
measurement conditions saved in the memory of the SJ-210, just press the [Blue] key on
the Home screen.
Select measurement conditions to load with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu]
key.
Displaying the SJ-210 Memory Load screen
NOTE
• Measurement conditions saved in the memory of the SJ-210 will be deleted if power
supply from both the AC adapter and battery is cut off.
TIP
• For information about saving measurement conditions in the memory of the SJ-210,
refer to 7.13.2, “Saving measurement conditions”.
Ten measurement conditions saved in the memory of the SJ-210 can be backed up
collectively when power supply is cut off due to occasions such as replacing the battery.
You can load measurement conditions that have been backed up in the memory of the
SJ-210.
Backup screen
TIP
• For more information about backing up to the memory card from the memory of the
SJ-210, or restoring backup data from the memory card, refer to 10.10.5, “Backing up
the memory card and restoring backup data”.
Home screen
[Blue]
Internal Memory Load screen
To Next Page
Loading...
