Mitutoyo SJ-210 - Setting the Save 10 Function

10. OPERATING ENVIRONMENT SETUP
No. 99MBB122A
10-33
10.10.4 Setting the Save 10 function
The instrument can be set to automatically save the latest 10 measurements to the
memory card.
This function is called “Save 10”. Note that when more than 10 total items are saved, the
older data is then deleted.
NOTE
• After the power to the instrument is turned on, it may take more time than usual when
the data is saved for the first time.
■ Operating procedure (Refer to “■ Accessing the Operating Environment Setup Menu screen” in Section
10.1.)
Home screen to Main Menu  
1 Select “Memory Card” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
2 Select “Save10Data” with the [ ↑ ] [ ↓ ] keys.
Operating Environment
Setup menu screen
Memory Card Setup screen