Mitutoyo SJ-210 - Initial Settings

No. 99MBB122A
3-24
3.5 Initial Settings
To start using the SJ-210, you must complete the initial settings.
Initial settings include the following items.
Setup item Description Related
section
Date Specify the date and time. Date can be included into the
measurement condition record and useful for record control.
10.2
Display
language
When necessary, change the language for the display. The
language can be selected from 16 languages including
Japanese, English, and German.
10.4
Switch unit When necessary, change the unit for the data such as the
measurement results shown on the display.
10.6
Decimal
Point
When necessary, change the decimal point type for the data
such as the measurement results shown on the display.
10.7
Buzzer
volume
You can adjust the volume of the buzzer that sounds when the
operation keys are pressed.
10.8
IMPORTANT
• Connect the AC adapter to prevent power to the instrument from being interrupted
during operation.
• When using the built-in battery, make sure it is sufficiently charged. If operations are
performed when the battery power is low, the SJ-210 may shut off during operation.