No. 99MBB122A
10-6
10.3 Data Output Settings
The [POWER/DATA] key is assigned the below functions.
Operation key ([POWER/DATA] key㧕
By pressing the [POWER/DATA] key, you can output the selected function's measurement
results.
SPC: You can output measurement results to a data processor.
A data processor (ex.: DP-1VR) must be connected in advance.
Printer: You can output measurement results to a printer.
Perform a communication check to set communication conditions.
Saving data: Measurement results can be saved on the memory card.
(The file name is automatically generated.)
Hard copy: The currently displayed screen image is saved as an image file to the
memory card. (The file name is automatically generated.)
[POWER/DATA] key
To Next Page
Loading...
