12. USEFUL FEATURES OF THE SJ-210
No. 99MBB122A
12-3
12.4 Displaying Calculation Results of the Continuous
Measurement (Vertical Trace/Horizontal Trace)
The SJ-210 can save measurement results of the last 10 measurements for every
customized parameter.
The measurement results are displayed in the chronological order. The latest
measurement result is displayed in the highest column on the screen. The older
measurement results are displayed in the lower columns in the chronological order.
The [ ↑ ] [ ↓ ] keys can be used to switch the displays shown in the lower columns than the
second highest column.
Only the latest measurement result can be saved in the memory card, printed, and
outputted as SPC data.
Trace screen
NOTE
• The result data of the measurements performed before the last 10 measurements are
deleted in order from the oldest data.
• The trace data is cleared when the Trace screen is freshened.
• The trace data may be cleared when the measurement conditions are changed.
TIP
• For information about setting the Trace screen, refer to 11.3, “Switching Calculation
Results Screen”.
㨇 ↓ 㨉
㨇 ↑ 㨉
To Next Page
Loading...
