Mitutoyo SJ-210 - Setting Calculation Conditions When a Profile Motif (R-Motif) Is Selected

8. MODIFYING PARAMETERS
No. 99MBB122A
8-31
8.4.6 Setting calculation conditions when a profile motif (R-Motif) is selected
The SJ-210 can use one of the following compliant motif connection methods when the
“R-Motif” profile motifs are selected: The method described in the body of ISO 12085, and
the method described in ISO 12085 Annex A.
■ Operating procedure (Refer to “■ Accessing the Submenu screen” in Section 8.1.)
Home screen to Main Menu   
1 Select “DetailsSetting” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
2 Select “AnnexA” with the [ ↑ ] [ ↓ ] keys.
3 Press the [Enter/Menu] key.
Pressing the [Enter/Menu] key cycles through the available settings,
“ON” and “OFF”.
TIP
• Press the [Esc/Guide] key to return to the previous screen.
Submenu screen
Setting Details Selection screen
Setting Details Selection screen