No. 99MBB122A
9-10
9.3 File Management
It is possible to modify the folder name of the internal memory and change the folder
assignment as the main folder as desired.
9.3.1 Modifying folder names
It is possible to modify the name of the folder to which the measurement results are saved.
Folder names can be modified on the following screens: Load Folder Select screen, Save
Folder Select screen, Delete Folder Select screen, and File Rename Folder Select Screen.
The operating procedures are explained using an example of the Load Folder Select
screen. The operating procedures are the same for the other screens.
NOTE
• The folder name cannot include [ * ], [ ¥ ], and [ . ].
■ Operating procedure (Refer to “■ Accessing the Measurement Data Menu screen” in Section 9.2.)
Home screen to Main Menu
1 Select “Read” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
2 Select the desired folder of which name is to be modified with the [ ↑ ]
[ ↓ ] keys, and press the “Rename” ([Red] key).
Loading Folder Select screen
Measurement Result Menu screen
To Next Page
Loading...
