No. 99MBB122A
5-1
5 MEASUREMENT RESULT
DISPLAY
The results of the measurements performed using the SJ-210 can be
displayed in various formats.
The SJ-210 has the functions to display the following calculation results and conditions
after performing measurement and recalculation. The measurement results to be
displayed can be switched by pressing the [PAGE] key.
In addition, the state of display can be set up according to the operational conditions.
Parameter calculated results display
The display can be set up to show the calculated results vertically/horizontally on the
screens. It can also be set up to show multiple numbers of parameter on one screen.
Using the tracing function, the SJ-210 can store and display the calculation results of
the latest 10 measurements.
The SJ-210 can also show the GO/NG judgment results for parameters.
Evaluation profile display
The display can be set up to show the calculated results vertically/horizontally on the
screens. It can also be selected whether to show the results on the screen or not.
The waveform can be zoomed in/out to the vertical/horizontal direction.
BAC/ADC graph display
The display can be set up to show the calculated results vertically/horizontally on the
screens.
Measurement condition display
The display can be set up to show the calculated results vertically/horizontally on the
screens. It can also be selected whether to show the results on the screen or not.
To Next Page
Loading...
