No. 99MBB122A
1-4
1.2 Standard SJ-210 Configuration
This section explains the standard configuration, the standard set, and typical uses of the
optional accessories.
■ SJ-210 standard type: Standard configuration
(set no.178-560-02: measuring force 4 mN/178-560-01: measuring force 0.75 mN)
Check that the purchased package contains all the products shown in the following figure.
Caution
• Only use the supplied AC adapter for this instrument. Using the adapter with equipment
other than the SJ-210 may cause damage to the adapter or equipment.
Display Unit
No.178-252
Drive/detector unit
Drive unit
No.178-230-2
Detector
No.178-390 (Measuring force: 4 mN)
No.178-296 (Measuring force: 0.75 mN)
Carrying case
No.12BAK699
Connection cable (1 m/40 in)
No.12BAA303
AC adapter
No.12BAK728
Power cord set
Precision roughness
specimen (with case)
No.178-601(mm)
No.178-602(inch/mm)
Calibration stage
No. 12BAK700
Operation
manual
No. 99MBB122A
Quick reference
manual
No. 99MBB123A
Display protection sheet
No.12BAK820
Standard accessory
To Next Page
Loading...
