1. SJ-210 OVERVIEW
No. 99MBB122A
1-5
■ SJ-210 detector retracting type: Standard configuration
(set no.178-562-02: measuring force 4 mN/178-562-01: measuring force 0.75 mN)
Check that the purchased package contains all the products shown in the following figure.
Caution
• Use the supplied AC adapter for this instrument only. Using the adapter with equipment
other than the SJ-210 may cause damage to the adapter or equipment.
NOTE
• Unless otherwise noted, this manual gives common information about the SJ-210
(standard type) and SJ-210 (detector retraction type).
Display Unit
No.178-252
Drive/detector unit
Drive unit
No.178-235
Detector
No.178-390 (Measuring force: 4 mN)
No.178-296 (Measuring force: 0.75 mN)
Carrying case
No.12BAK699
Connection cable (1 m/40 in)
No.12BAA303
AC adapter
No.12BAK728
Power cord set
Precision roughness
specimen (with case)
No.178-601(mm)
No.178-602(inch/mm)
Calibration stage
No. 12BAK700
Operation
manual
No. 99MBB122A
Quick reference
manual
No. 99MBB123A
Display protection sheet
No.12BAK820
Standard accessory
To Next Page
Loading...
