Mitutoyo SJ-210 - Setting the Number of Measurements

No. 99MBB122A
6-14
6.5.1 Setting the number of measurements
Specify the number of measurements for performing calibration.
The calibration results of specified numbers of measurements are averaged to adjust gain.
■ Operating procedure (Refer to “■ Accessing the Calibration Menu screen” in Section 6.2.)
Home screen to Main Menu   
1 Select “Cal. Condition” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
2 Select “Meas. No.” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu]
key.
3 Select a measurement number for the calibration with the [ ↑ ] [ ↓ ] keys,
and press the [Enter/Menu] key.
Calibration Menu screen
Calibration Condition Setup screen
Number of Measurement Setup
screen