Mitutoyo SJ-210 - Connecting the SJ-210 and Printer

No. 99MBB122A
13-8
13.2.1 Connecting the SJ-210 and printer
In order to print, the SJ-210 must be connected to the printer with the RS-232C printer
cable.
The following optional printers are supported.
Printer Type Printer Model
PT-1 178-421
PT-2
㧙
1 Place your nail on the hollow provided on the rear cover, and push the rear cover in
the direction indicated by the arrow (1).
2 Pull the rear cover in the direction indicated by the arrow (2) and remove it.
Detaching the rear cover
3 Connect the RS-232C communication port on the rear of the SJ-210 with the
RS-232C port on the printer using the optional RS-232C printer cable.
Connecting to the printer
4 Turn ON the printer power.
6HWWL


 WKHSULQW
Printer
RS-232C Port
RS-232C
communication port
RS-232C
printer cable