Mitutoyo SJ-210 - Condition List Display; GO;NG Judgment Result Display

No. 99MBB122A
5-6
5.1.4 Condition list display
The list of the measurement conditions can be displayed. When the saved measurement
results or conditions are loaded, the file name of the loaded data is displayed in “File”.
The Condition List screen appears after the Graph screen.
The [ → ]/[ ← ] key also can be used to switch the display on the Condition List screen.
Condition List screen
TIP
• For information about setting the display directions and whether to display the condition
list or not, refer to 11.6, “Switching Measurement Conditions List Screen”.
5.1.5 GO/NG judgment result display
When the GO/NG judgment function is used, the measurement data is compared with its
upper and lower tolerance limits. When the measurement falls outside the limits, the
display color of the measurement result changes.
When the measurement is within tolerance limits, the “OK” sign appears to the right of the
parameter name.
GO/NG judgment result (GO)
[PAGE]
or
[ → ]
[ ← ]