5. MEASUREMENT RESULT DISPLAY
No. 99MBB122A
5-7
When the measurement exceeds the upper limit, the “+NG” sign appears to the right of the
parameter name, and the displayed measurement result turns red.
GO/NG judgment result (above the upper limit)
When the measurement falls below the lower limit, the “-NG” sign appears on the right
side of the parameter name. In addition, the part indicating the measurement result turns
blue.
GO/NG judgment result (below the lower limit)
NOTE
• When the upper or lower limit is set at 0, the limit is not be enabled for GO/NG
judgment.
The upper limit and lower limit can be set individually. Therefore, it is possible to
individually disable the GO/NG judgment with the upper/lower limits.
TIP
• For information about setting the GO/NG judgment function, refer to 8.3, “Setting the
GO/NG Judgment Function”.
To Next Page
Loading...
