Mitutoyo SJ-210 - Saving Measurement Results; Saving the Measurement Results Newly

9. MEASUREMENT RESULTS (LOAD/SAVE/DELET/RENAME)

No. 99MBB122A

9-17
9.5 Saving Measurement Results
The measurement results can be saved on the memory card.
IMPORTANT
• When using the built-in battery, make sure it is sufficiently charged. When the
measurement results are saved while battery power is low, the SJ-210 may shut off
while the data is being saved.
NOTE
• To load the saved measurement results with communication software, make sure to
save the measurement results in a text file format beforehand. Refer to 10.10.3, “Saving
text data to the memory card”.
9.5.1 Saving the measurement results newly
■ Operating procedure (Refer to “■ Accessing the Measurement Data Menu screen” in Section 9.2.)
Home screen to Main Menu  
1 Select “Save” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
2 Select the folder to which the measurement results are saved with the
[ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
Measurement Result Menu screen
Save Folder Select screen