Mitutoyo SJ-210 - Setting the Decimal Point

No. 99MBB122A
10-24
10.7 Setting the Decimal Point
You can change the character used as a decimal point in measurement displays, etc. The
character can be a period, or a comma.
■ Operating procedure (Refer to “■ Accessing the Operating Environment Setup Menu screen” in Section
10.1.)
Home screen to Main Menu  
1 Select “Decimal Point” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
2 Select the decimal point to use with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
TIP
• Press the [Esc/Guide] key to return to the previous screen.
Decimal Point selection
Operating Environment
Setup menu screen