Mitutoyo SJ-210 - Setting the Self-Timer

10. OPERATING ENVIRONMENT SETUP
No. 99MBB122A
10-39
10.12 Setting the Self-timer
You can set measurement to begin after an amount of time has passed from pressing the
[START/STOP] key.
■ Operating procedure (Refer to “■ Accessing the Operating Environment Setup Menu screen” in Section
10.1.)
Home screen to Main Menu  
1 Select “Self-timer” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu]
key.
2 Set the self-timer function to ON or OFF.
Pressing the [Enter/Menu] key cycles through the available settings,
“ON” and “OFF”.
“ON”: Sets the self-timer function to ON.
“OFF”: Sets the self-timer function to OFF.
3 Select “Wait time” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu]
key.
Operating Environment
Setup menu screen
Self-Timer Setup screen
Self-Timer Setup screen