3. SETTING UP THE SJ-210
No. 99MBB122A
3-17
3.4.2 Turning on the power supply
■ Power supply from a built-in battery (when using a built-in battery)
1 Place your nail on the hollow provided on the rear cover, and push the rear cover in
the direction indicated by the arrow (1).
2 Pull the rear cover in the direction indicated by the arrow (2) and remove it.
Detaching the rear cover
3 Set the built-in battery on/off switch to ON.
Built-in battery on/off switch
4 Fit the rear cover to the hollow of the rear of the display unit in the direction indicated
by the arrow (1).
5 Push the rear cover in the direction indicated by the arrow (2) and attach it.
Attaching the rear cover
㧔1㧕
㧔2㧕
Rear cover
㧔1㧕
㧔2㧕
Rear cover
Built-in battery on/off switch
OFF ON
To Next Page
Loading...
