Mitutoyo SJ-210 - Selecting Parameters

13. SAVE / OUTPUT RESULTS USING [POWER/DATA] KEY
No. 99MBB122A
13-5
13.1.2 Selecting parameters
Select the parameters for SPC output.
Only the calculation results of parameters displayed on the Home screen with the SPC
mark (
) can be output as SPC data.
1 Press the [PAGE] key of the SJ-210 until the parameters you want to output are
displayed.
Parameter display
2 When multiple parameters are displayed on the same screen, use the [ ↑ ] [ ↓ ] keys
to move the SPC mark, and select calculation result parameters to output.
Parameter selection (multiple parameters on 1 screen)
[PAGE]
Customized parameters
are displayed in turn.
[ ↓ ]
[ ↓ ]
[ ↓ ]
[ ↓ ]
[ ↓ ]
[ ↓ ]