No. 99MBB122A
5-8
5.1.6 Trace display
The SJ-210 can save measurement results of the last 10 measurements for every
customized parameter.
The measurement results are displayed in chronological order. The latest measurement
result is displayed in the highest row on the screen. The older measurement results are
displayed in the lower rows in chronological order.
The [ ↑ ] [ ↓ ] key can be used to switch the displays shown in the lower rows than the
second highest row.
Only the latest measurement result can be saved in the memory card, printed, and output
as SPC data.
Trace screen
NOTE
• The result data of the measurements performed before the last 10 measurements are
deleted in order from the oldest data.
• The trace data is cleared when the Trace screen is refreshed.
• The trace data may be cleared when the measurement conditions are changed.
TIP
• For information about setting the Trace screen, refer to 11.3, “Switching Calculation
Results Screen”.
㨇 ↓ 㨉
㨇 ↑ 㨉
To Next Page
Loading...
