Mitutoyo SJ-210 - Saving Text Data to the Memory Card

10. OPERATING ENVIRONMENT SETUP
No. 99MBB122A
10-31
10.10.3 Saving text data to the memory card
Measurement data can be saved in text format to the memory card.
■ Operating procedure (Refer to “■ Accessing the Operating Environment Setup Menu screen” in Section
10.1.)
Home screen to Main Menu  
1 Select “Memory Card” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
2 Select “Text file” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu]
key.
3 Select the type of data to be saved as text with the [ ↑ ] [ ↓ ] keys, and
press the [Enter/Menu] key.
“OFF”: Sets the save as text function to OFF.
“All Data”: All data is saved as text.
“CalcResult”: Only calculation results are saved as text.
Operating Environment
Setup menu screen
Memory Card Setup screen
Text File Saving Setup screen