10. OPERATING ENVIRONMENT SETUP
No. 99MBB122A
10-41
10.13 Setting PC Communication Conditions
This is an explanation of setting the RS-232C interface to communicate with a PC.
NOTE
• The SJ-210's RS-232C connector is used for both printer and PC connectivity.
The RS-232C communication settings here are for PC communication only. Printer
communication conditions are internally fixed.
■ Operating procedure (Refer to “■ Accessing the Operating Environment Setup Menu screen” in Section
10.1.)
Home screen to Main Menu
1 Select “PC communicat.” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
2 Setting the RS-232C communication function to ON or OFF.
Pressing the [Enter/Menu] key cycles through the available settings,
“ON” and “OFF”.
“ON”: Sets RS-232C communication to ON.
“OFF”: Sets RS-232C communication to OFF.
NOTE
• When “RS-232C” is set to ON, communication to the PC is
prioritized even when data output is set to “Printer”.
3 Select “Speed” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu]
key.
Operating Environment
Setup menu screen
PC Communication
Setup screen
PC Communication
Setup screen
To Next Page
Loading...
