No. 99MBB122A
9-12
9.3.2 Specifying the main folder
After the measurement, press the [POWER/DATA] key to save the measurement results in
the main folder. A specific folder can be selected as this main folder.
The main folder can be specified on the following screens: Load Folder Select screen,
Save Folder Select screen, Delete Folder Select screen, and File Rename Folder Select
screen.
The operating procedures are explained using an example of the Load Folder Select
screen. The operating procedures are the same for the other screens.
TIP
• For information about setting the data output, refer to 10.3, “Data Output Settings”.
■ Operating procedure (Refer to “■ Accessing the Measurement Data Menu screen” in Section 9.2.)
Home screen to Main Menu
1 Select “Read” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
2 Select the desired folder to be specified as the main folder with the [ ↑ ]
[ ↓ ] keys, and press the “Sw. Main” ([Blue] key).
“*” is added before the folder name.
TIP
• Press the [Esc/Guide] key to return to the previous screen.
Measurement Result Menu screen
Load Folder Select screen
Load Folder Select screen
To Next Page
Loading...
