Mitutoyo SJ-210 - Attaching and Detaching the Drive;Detector Unit

No. 99MBB122A
3-6
3.2.2 Attaching and detaching the drive/detector unit
Follow the method below to attach and detach the drive/detector unit to/from the display
unit.
■ Detaching the drive/detector unit
1 While pressing section A in the direction indicated by the arrow (1), erect the
drive/detector unit in the direction indicated by the arrow (2). Pull out the
drive/detector unit from the hook on the drive/detector unit retaining plate
2 While pulling out section B in the direction indicated by the arrow (3), detach the
drive/detector unit from the drive/detector unit retaining pin.
Detaching the drive/detector unit
IMPORTANT
• Do not hold the detector when detaching the drive/detector unit. Otherwise, the detector
may be damaged.
A
B
(1)
(2)
(3)
Position of the drive/detector unit retaining pin
Drive/detector unit retaining plate
Drive/detector unit retaining pin