Mitutoyo SJ-210 - Page 56

3. SETTING UP THE SJ-210
No. 99MBB122A
3-5
2 After confirming the orientation of both detector and drive unit connectors (pin
positions), gently and straightforward insert the detector into the drive unit hole.
Attaching the detector
■ Detaching the detector
With the drive unit at the origin point position, quietly pull out the detector from the drive
unit.
Detaching the detector
Set the detector
with the stylus
facing downward.
Drive unit
Detector
Connector view
(Detector)
Connector view
(Drive unit)
Drive unit
Detector