Mitutoyo SJ-210 - Restoring Factory Default Settings

No. 99MBB122A
10-46
10.16 Restoring Factory Default Settings
You can reset all settings in the SJ-210 to their original values (factory default settings).
IMPORTANT
• Care must be taken when resetting to the factory-set defaults. When the SJ-210 is
reset, all of your set measurement conditions, etc. are be lost.
• Drive unit type settings, calibration information, decimal point settings and language
settings remain unchanged.
For information about the contents of the factory default settings, refer to 10.16.1, “Items
restored to original values when restoring factory default settings”.
■ Operating procedure (Refer to “■ Accessing the Operating Environment Setup Menu screen” in Section
10.1.)
Home screen to Main Menu  
1 Select “ResetToDefault” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
2 Press the [Enter/Menu] key.
 All initial settings are restored.
TIP
• Press the [Esc/Guide] key to return to the previous screen.
• The screen returns to the Home screen when the “Home”
([Blue] key) is pressed.
Operating Environment
Setup menu screen