Mitutoyo SJ-210 - Optional Accessories

17. PRODUCT SPECIFICATIONS
No. 99MBB122A
17-7
17.7 Optional Accessories
Part No. Name
178-390 Standard detector: Measuring force 4 mN, Stylus tip radius 5 μm (200 μin)
178-296 Standard detector: Measuring force 0.75 mN, Stylus tip radius 2 μm (80 μin)
178-391 SR10 detector: Measuring force 4mN, Stylus tip radius 10 μm (400 μin)
178-392 Small hole detector: Measuring force 4 mN, Stylus tip radius 5 μm (200 μin)
178-383 Small hole detector: Measuring force 0.75 mN, Stylus tip radius 2 μm (80 μin)
178-393 Extra small hole detector: Measuring force 4 mN, Stylus tip radius 5 μm (200 μin)
178-384 Extra small hole detector: Measuring force 0.75 mN, Stylus tip radius 2 μm (80 μin)
178-394
*1
Deep groove detector: Measuring force 4mN, Stylus tip radius 5 μm (200 μin)
178-385
*1
Deep groove detector: Measuring force 0.75 mN, Stylus tip radius 2 μm (80 μin)
178-398 Gear tooth surface detector: Measuring force 4 mN, Stylus tip radius 5 μm (200 μin)
178-388 Gear tooth surface detector: Measuring force 0.75 mN, Stylus tip radius 2 μm (80 μin)
178-230-2 Standard drive unit
178-235 R-Drive unit
178-233-2 S-Drive unit
178-234-2 S-Drive unit set
178-386
*2
Standard detector for S-Drive unit: Measuring force: 4 mN, Stylus tip radius 5 μm (200 μin)
178-387
*2
Standard detector for S-Drive unit: Measuring force 0.75 mN, Stylus tip radius 2 μm (80 μin)
178-033
*1
Setting attachment V type
178-034
*1
Setting attachment slider type
178-035
*1
Setting attachment Inside diameter type
12AAA210
*1
Extension rod 50 mm (19.7 in)
12AAA216
*1
Support feet set
12AAA217
*1
Nosepiece for flat surface
12AAA218
*1
Nosepiece for cylinder
12AAA219
*1
Adapter for vertical application
12AAA220 Adapter for magnetic stand φ9.5 mm (3/8 in dia.)
12AAA221 Adapter for magnetic stand φ8 mm (0.315 in dia.)
12AAA222 Adapter for height gage (mm: 9 x 9 mm)
12AAA233 Adapter for height gage (inch: 1/4 in x 1/2 in)