No. 99MBB122A
10-4
10.2 Setting the Date and Time
You can set the date and time on the SJ-210. This is useful for records management, as
the day and time are recorded as part of measurement data and conditions.
■ Operating procedure (Refer to “■ Accessing the Operating Environment Setup Menu screen” in Section
10.1.)
Home screen to Main Menu
1 Select “Date/Time” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
2 Select “Year” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
“Mon/Date” and “Time” can be selected as well.
3 Specify the date and time.
TIP
• For information about numeric value entry, refer to 2.5,
“Entering Numeric Values/Characters”.
Operating Environment
Setup menu screen
Date/Time screen
Date/Time Setup screen
To Next Page
Loading...
