Mitutoyo SJ-210 - Setting the Print Items

No. 99MBB122A
10-10
10.3.2.1 Setting the print items
When printing output from the SJ-210, the following items can be printed.
 Measurement conditions
 Evaluation profiles
 Calculation results
 N (sampling lengths) result
 Tolerance limit value
 BAC
 ADC
For the SJ-210 these variables for printing are referred to as print items. Each print item
can be individually set for printing.
■ Operating procedure (Refer to “■ Accessing the Operating Environment Setup Menu screen” in Section
10.1.)
Home screen to Main Menu  
1 Select “Data Output” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
2 Select “Printer” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu]
key.
Data Output Setup screen
Operating Environment
Setup menu screen