No. 99MBB122A
10-1
10 OPERATING
ENVIRONMENT SETUP
Setting up the basic operating environment of this instrument allows
you to use its functions effectively.
You can set the following functions in the operating environment setup.
Date/Time : Settings for date and time, and their display methods
Data Output : Settings of functions assigned to the [POWER/DATA] key
Select Language : Select the display language.
Drive : Settings and calibration for the drive unit
Switch Unit : Switches between millimeters and inches for the unit of
measurement (fixed to millimeters when the language is
Japanese).
Decimal Point : Select a period or comma to use as the decimal point.
Volume Adjustment : Adjust the volume of indicator sounds.
Function Restriction : Restrict the settings of functions (password protection).
Memory Card : Format or save to the memory card.
Auto-sleep : Set the time and ON/OFF for the auto-sleep function.
Self-timer : Set the time and ON/OFF for the self timer function.
PC Communication : Set RS-232C communication conditions.
Detector Position : Detector position confirmation screen (maintenance function)
LCD/Key Test :
Check the LCD display and key operation (maintenance function).
Reset to Default : Reset the settings of instrument to factory default settings.
Version : Confirm the version of the SJ-210's display unit
To Next Page
Loading...
