Mitutoyo SJ-210 - Deleting Measurement Conditions

7. MODIFYING MEASUREMENT CONDITIONS
No. 99MBB122A
7-35
7.13.4 Deleting measurement conditions
You can delete saved measurement conditions from the internal memory or memory card.
IMPORTANT
• When using the built-in battery, make sure it is sufficiently charged. If measurement
conditions are deleted while the battery power is low, the SJ-210 may shut off while the
data is being deleted.
■ Operating procedure (Refer to “■ Accessing the Measurement Conditions Menu screen” in Section 7.13.1.)
Home screen to Main Menu  
1 Select “Delete” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
2 Select the save location that has the measurement conditions you
want to delete with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
“Direct”: internal memory
“Memory Card”: memory card
3 Select the measurement conditions to delete with the [ ↑ ] [ ↓ ] keys,
and press the [Enter/Menu] key.
Measurement Condition
Deletion Select screen
Internal Memory Deletion screen
Measurement Conditions Menu
screen