Mitutoyo SJ-210 - Deleting Measurement Results


No. 99MBB122A

9-20
9.6 Deleting Measurement Results
It is possible to delete the measurement results saved on the memory card.
IMPORTANT
• When using the built-in battery, make sure it is sufficiently charged. When the
measurement results are deleted while the level of the battery remainder power is low,
the power of the SJ-210 may be turned off during deleting the data.
■ Operating procedure (Refer to “■ Accessing the Measurement Data Menu screen” in Section 9.2.)
Home screen to Main Menu  
1 Select “Delete” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
2 Select the folder containing the measurement results to be deleted with
the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
3 Select the measurement results to be deleted with the [ ↑ ] [ ↓ ] keys,
and press the [Enter/Menu] key.
To delete all the saved measurement data, press the “Del. All” ([Blue]
key).
NOTE
• When deleting many data found by searching all at once, it
may take several minutes.
TIP
• It is possible to search for the measurement results to be
deleted. For more information about the searching
procedure, refer to 9.4.2, “Searching for files to load”.
Measurement Result Menu screen
Delete Folder Select screen
Measurement Result
Deletion screen