No. 99MBB122A
10-12
10.3.2.2 Setting the print magnification
The SJ-210 can change the vertical and horizontal magnification of a printed evaluation
profile.
■ Types of vertical and horizontal magnification
The following tables show the possible horizontal and vertical print magnifications that can
be set.
Print Magnification
Vertical Magnification (factor) Horizontal Magnification (factor)
10 1
20 2
50 5
100 10
200 20
500 50
1K 100
2K 200
5K 500
10K 1K
20K AUTO
50K
100K
AUTO
TIP
• When “AUTO” is set, the optimal printing magnification is automatically chosen. During
normal operation, it is recommended to use the “AUTO” setting.
• The vertical and horizontal magnification has been factory-set to “AUTO” (automatic
optimal magnification).
To Next Page
Loading...
