No. 99MBB122A
3-2
3.2 Attaching and Detaching the Drive/Detector Unit
3.2.1 Attaching and detaching the detector
The detector can be detached from the drive unit. After completing a measurement task
with the SJ-210, detach the detector from the drive unit and store it in a safe place to
prevent damage caused by such as a blow, etc.
IMPORTANT
• Turn off the drive unit before you attach or detach the detector. Attaching or detaching
the detector while the drive unit is on can result in damage to the unit.
• Attach and detach the detector when the drive unit is at the origin point position. When
the drive unit is not at the origin point position, attaching or detaching the detector can
be difficult and might also damage the unit.
Drive unit at the origin point position
Drive unit not at the origin point position
Connector
Detector
Connector
Detector
To Next Page
Loading...
