Mitutoyo SJ-210 - Checking the Calibration History

No. 99MBB122A
6-26
6.6 Checking the Calibration History
SJ-210 can store up to 100 date and time information as calibration history.
Check the calibration history following the procedures below.
NOTE
• Be aware that the calibration history is completely cleared when the “Clear history”
[Blue] key is pressed.
Also, be aware that the calibration history is completely cleared, when power supply
from built-in battery is cut or “RestToDefault” in the “Set Environ.” is performed.
■ Operating procedure (Refer to “■ Accessing the Calibration Menu screen” in Section 6.2.)
Home screen to Main Menu   
1 Select “Calib.History” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
2 Check the data of time of the calibration.
TIP
• To clear the calibration history, press the “Clear history”
([Blue] key).
Calibration Menu screen
Calibration History screen