Mitutoyo SJ-210 - Modifying the Measuring Range

No. 99MBB122A
7-24
7.11 Modifying the Measuring Range
The SJ-210 can perform measurement in one of the following measuring ranges: 25, 100,
360 m (1000, 4000, 14400 μin), and Auto. Use Auto range unless a range is specified: a
narrow range is sensitive and is apt to lead to an overrange.
TIP
• When the measuring range is changed, the resolution also changes.
■ Operating procedure (Refer to “■ Accessing the Measurement Conditions screen” in Section 7.1.)
Home screen to Main Menu   
1 Select “Range” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
2 Select a measurement range compatible with the target surface with
the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
 The selected measuring range appears on the Measurement
Conditions screen.
TIP
• Press the [Esc/Guide] key to return to the previous screen.
• When the Measurement Conditions screen has been
accessed using the shortcut [Red] key, pressing the
[Esc/Guide] key once returns you to the Home screen.
Measurement Conditions screen
Measurement Range Setup screen
Measurement Conditions screen