No. 99MBB122A
9-22
9.7 Renaming Measurement Results
It is possible to modify the file name of the measurement results saved on the memory
card.
IMPORTANT
• When using the built-in battery, make sure it is sufficiently charged. When the file names
of the measurement results are modified while the level of the battery remainder power
is low, the power of the SJ-210 may be turned off during modifying the file names.
NOTE
• The file name cannot include [ * ], [ ¥ ], and [ . ].
■ Operating procedure (Refer to “■ Accessing the Measurement Data Menu screen” in Section 9.2.)
Home screen to Main Menu
1 Select “File Rename” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu]
key.
2 Select the folder containing the measurement results whose file name
to be modified with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu] key.
3 Select the measurement results file name to be modified with the [ ↑ ]
[ ↓ ] keys, and press the [Enter/Menu] key.
TIP
• It is possible to search for the measurement results whose
file names are to be modified. For more information about
the searching procedure, refer to 9.4.2, “Searching for files
to load”.
Measurement Result Menu screen
File Rename Folder Select screen
Measurement Result File
Rename screen
To Next Page
Loading...
