Mitutoyo SJ-210 - SAVE; OUTPUT RESULTS USING [POWER;DATA] KEY

No. 99MBB122A
13-1
13 SAVE / OUTPUT RESULTS
USING [POWER/DATA]
KEY
You can output or save measurement results to a connected optional
accessory by pressing the [POWER/DATA] key.
By pressing the [POWER/DATA] key, you can save or output the selected function's
measurement results.
Operation key ([POWER/DATA] key)
SPC: You can output measurement results to a data processor.
A data processor (e.g., DP-1VR) must be connected in advance.
Printer: You can output measurement results to a printer.
Perform a communications check to set communications conditions.
Saving data: Measurement results can be saved on the memory card.
(The file name is automatically generated.)
Hard copy: The currently displayed screen image is saved as image data to the
memory card.
(The file name is automatically generated.)
NOTE
• A DP-1VR (optional accessory) must be purchased for SPC output.
• For printer output from the SJ-210, an external printer (optional accessory) and
proprietary RS-232C cable (optional accessory) must be purchased.
•
To save data or create hard copies, a memory card (optional accessory) must be purchased.
[POWER/DATA] key