Mitutoyo SJ-210 - Entering Numeric Values;Characters

2. OPERATION KEYS AND DISPLAY OF THE SJ-210
No. 99MBB122A
2-15
2.5 Entering Numeric Values/Characters
It is sometimes necessary to enter numeric values (including “-” and “_”) or characters
(alphabet) for such operations as modifying the measurement condition with the SJ-210.
This section explains how to enter a numeric value or a character.
■ Key operation required to enter a numeric value or a character to modify the measurement condition
When entering a numeric value or a character, select a specific digit place for an
increment. Numeric values include the symbols “-” and “_”.
The following keys are used to enter a numeric value or a character.
 [ ↑ ] key: Count-up (increment the numeric value or the character)
 [ ↓ ] key: Count-down (decrease the numeric value or the character)
 [ ← ] key: Shift the input cursor to the left
 [ → ] key: Shift the input cursor to the right
 [Red] key: Changing the available character type for entering (numeric values or
characters)
 [Enter/Menu] key: Accepting the entered numeric value
The operating procedures are explained using an example where a file name is modified
from “09081801” to “090818R3” when specifying a new measurement condition.
NOTE
• Do not press the [Enter/Menu] key before the numeric value has been entered. Only
press the [Enter/Menu] key to terminate numeric value entry and accept it at that point in
time.
1 Press the [ → ] key to move cursor to the 8th digit.
2 Press the [ ↑ ] key two times.