Mitutoyo SJ-210 - Setting the Display of the Setting Conditions

11. SWITCHING THE CALCULATION RESULTS SCREEN
No. 99MBB122A
11-11
11.7 Setting the Display of the Setting Conditions
This section explains the setup whether to display the settings such as the calibration date,
cumulative distance and data output when turning the power on.
■ Operating procedure (Refer to “■ Accessing the Screen Change Menu screen” in Section 11.2.)
Home screen to Main Menu  
1 Select “SetCondit.” with the [ ↑ ] [ ↓ ] keys, and press the [Enter/Menu]
key.
2 Select the setting conditions display with the [ ↑ ] [ ↓ ] key, and press
the [Enter/Menu] key.
The setup item is as follows.
“Display”: Displays the setting conditions.
“Non Disp.”: The setting conditions are not displayed.
 The setup items appear on the Screen Change Menu screen.
TIP
• Press the [Esc/Guide] key to return to the previous screen.
• The screen returns to the Home screen when the “Home”
([Blue] key) is pressed.
Screen Change Menu screen
Screen Change Menu screen
Condition Display Setup screen