10. OPERATING ENVIRONMENT SETUP
No. 99MBB122A
10-9
4 Select “Auto-print” with the [ ↑ ] [ ↓ ] keys.
5 Set the auto-print function to ON or OFF.
Auto-print is a function that automatically prints a measurement
result after a measurement is complete.
Pressing the [Enter/Menu] key cycles through the available settings,
“ON” and “OFF”.
“ON”: Sets the auto-print function to ON.
“OFF”: Sets the auto-print function to OFF.
6 Set the items to print and the print magnification as required.
NOTE
• For information about print item setup, refer to 10.3.2.1,
“Setting the print items”.
• For information about setting the print magnification, refer
to 10.3.2.2, “Setting the print magnification”. Note that the
factory default setting for vertical and horizontal
magnification is “AUTO” (automatic optimal magnification).
TIP
• Press the [Esc/Guide] key to return to the previous screen.
• The screen returns to the Home screen when the “Home”
([Blue] key) is pressed.
Print Setup screen
To Next Page
Loading...
