3. SETTING UP THE SJ-210
No. 99MBB122A
3-7
■ Mounting the drive/detector unit
1 Push the drive/detector unit all the way into the display unit as indicated by the arrow
(1). It fits with the drive unit retaining pin.
2 Lower the drive/detector unit in the direction indicated by the arrow (2) while
pressing it in the direction indicated by the other arrow (1) until it is caught by the
hook on the drive unit retaining plate.
Mounting the drive/detector unit
(1)
(2)
Position of the drive/detector unit retaining pin
Drive/detector unit retaining plate Drive/detector unit retaining pin
To Next Page
Loading...
