No. 99MBB122A
1-6
■ SJ-210 transverse tracing drive type: Standard configuration
(set no.178-564-02: measuring force 4 mN/178-564-02: measuring force 0.75 mN)
Check that the purchased package contains all the products shown in the following figure.
Caution
• Use the supplied AC adapter for this instrument only. Using the adapter with equipment
other than the SJ-210 may cause damage to the adapter or equipment.
Display Unit
No.178-252
Drive/detector unit
Drive unit
No.178-233-2
Drive unit set
No.178-234-2
Detector
No.178-386 (Measuring force: 4 mN)
No.178-387 (Measuring force: 0.75 mN)
Carrying case
No.12BAK699
Connection cable (1 m/40 in)
No.12BAA303
AC adapter
No.12BAK728
Power cord set
Precision roughness
specimen (with case)
No.178-605(mm)
No.178-606(inch/mm)
Calibration stage
No. 12BAK700
Hex-socket head screw
(M3)×8 (screws×4)
No.390151
Hexagonal wrench
Nominal size 2.5
No.538615
Nominal size 1.5
N
.
1
Contact adapter
No. 12AAE643
V-shaped adapter
No. 12AAE644
Operation manual
No. 99MBB122A
Quick reference manual
No. 99MBB123A
Display protection sheet
No.12BAK820
Standard accessory
To Next Page
Loading...
