Mitutoyo SJ-210 - Page 18

1. SJ-210 OVERVIEW
No. 99MBB122A
1-3
■ Features of the SJ-210 (detector retracting type)
 Detector retraction function
For the SJ-210 detector retracting type, the detector extends outwards without
contacting the measurement surface. Thereby, the detector can be set up for
measurement without the detector tip being in contact with a work piece.
NOTE
• Unless otherwise noted, this manual gives common information about the SJ-210
(standard type) and SJ-210 (detector retraction type).
■ Features of the SJ-210 (transverse tracing drive type)
 Detector transverse tracing drive function
For the SJ-210 transverse tracing drive type, the detector moves horizontally. Thereby,
the detector can be set up for roughness measurement on a work piece that has
limited dimensions (e.g., crankshafts).
NOTE
• Unless otherwise noted, this manual gives common information about the SJ-210
(standard type) and SJ-210 (transverse tracing drive type).